Industrial Sectional Door

The industrial sectional door is composed of door body, balancing system, driving and control system, safety device, rail, soaling and other options (such as wicket and window). The principle is to achieve servo balancing relying on the balancing system, drive the door body by (manual or electric) external force to operate in the rail system suitable to start Owing to is portable operation, good insulation and sealing. the industrial sliding door is appled to al types of plants, logistics warehouses of special garages raising higher requirements for heat preservation, sealing and beauty.

Industrial Sectional Doors are the most durable and longest lasting doors to ensure circulation at the areas of the factory entrance and exit of goods, loading and unloading areas.

The body of industrial sectionaldoor is forming by 40 mm sandwich panels. These panels provides sound and heat insulation due to the intense doped polyurethane insulation was injected between galvanized steel sheet.

Industrial sectional door systems provide space-saving with opening parallel to the ceiling.Any opening can be used clearly.

Industrial sectional door systems produces in accordance with the transition range and the height in the factory buildings or warehouses.

The panels are standard white of industrial sectional door systems can also be applied in different RAL colors in accordance with the exterior of the building.

Industrialsectional doors play an active role in vehicle and pedestrian traffic and also can applied with standard buttons, pull-chain type of manual or remote control.

Industrial sectional doors consists of steel sandwich panels.Sandwich panels is achieved by injecting polyurethane with high-pressure between the galvanized steel sheets.

Provided excellent heat insulation thanks to the high-pressure polyurethane.In the door panels can be opened double-walled acrylic glazed windows for lighting.

Between the door panels, top, sides and bottom is a black gaskets preventing air, rain, dust and wind pass through and provides a high degree of impermeability.All panels have finger safety system.

Standard safety edge The safety edge device is integrated together with a transmitter and receiver in the door’s bottom rubber seal.

If the signal is broken by an object or person, the door will stop and retract. The maximum contact pressure for the rubber seal is 40 kg.

Choose the predictive obstacle safety edge if you have products that cannot withstand that level of pressure.

Industrial Sectional Door Technical Parameters

Send Inquiry to us!

Verification Code